Riser Cards and Slide Rails
ARC2-793 (15735)

2U PCI-32/PCI-E x16 combo riser card,
2*PCI 32bit/5V + PCI-E x16 on slot-7.

The top PCIe x16 riser slot is linked to the
gold fingers and connects to the
motherboard PCIex16 slot-7 .

The middle PCI-32(MAIN) riser slot is linked
to the gold fingers of another parallel riser
card and connect to the PCI-32 slot-6. The
bottom PCI-32 riser slot(shared ) is
connected to the PCI-32 slot-5.

For motherboard w/PCIex16 on slot-7 and
2*PCI-32 on slot-5, slot-6, such as Intel
D915/D925/D945 Series, Tyan
S5120/S5130,S2865 etc.
ARC2-793-C3 (15736)

PCI-E/PCI-32 combo riser card, 1*PCIe x16 +
2*PCI-32 W/custom length flexible cable.

For extention of PCIe x16 on motherboard
slot-7 and two PCI-32 on nearby slots (from
PCI-32 slot-1 to slot-5), such as Intel
D955XBK (use ARC2-793-C5), Intel D946,
DG965,DQ965,DG31PR,DG33BU, DG33FB
Series, Supermicro P8SAA, FOXCONN 915P
Series (use ARC2-793-C3), Gigabyte
GA-K8N51PVMT-9, GA-K8N51GMF-9 (use
ARC2-793-C5) etc.

ARC2-793-C3 (w/3cm cable)
ARC2-796x8 (15737)
ARC2-796 (15738)

2U PCIE/PCIX combo riser card, supporting
2-slots PCIX-64bit/3.3V and 1-slot PCIe on
motherboard slot-7.

The middle PCIE riser slot is linked with a
short PCIE header board attached in the
back and plug to the motherboard PCIE (x16
or x8) slot-7.

The bottom PCIX-64 (main) riser slot is
linked to another goldfingers and plug to the
motherboard PCI-64 slot-6. The top PCIX-64
riser slot (shared) is linked w/8-wires paddle
link and connect to the nearby motherboard
PCI-64 slot-5.

For Asus P5MT, K8N-LR9 etc. (use
ARC2-796).
Use ARC2-796X8 for Supermicro PDSME+

1) ARC2-796 (2-slots PCIX-64 & 1-slot PCIE
x16 for motherboard PCIEx16 slot-7)
2) ARC2-796X8 (2-slots PCI-X64 & 1-slot
PCIEx8 for motherboard PCIE x8 slot-7)
ARC2-797-C5 (15739)

2U 3-slots PCIE/PCI combo riser card.
supporting 2-slots PCI-32bit/5V and 1-slot
PCIe x16 on motherboard slot-7.

The top PCIe x16 riser slot is linked to the
PCIE goldfingers and connects to the
motherboard PCIex16 slot-7. The middle and
bottom PCI-32 riser slots, all independent
connections, linked with flex cable and
connect to the motherboard PCI-32 slots.

For expansion of 2-slots PCI-32 independent
connection and one-slot PCIe x16 on
motherboard PCIe x16 slot-7, such as Intel
DG33,D965 Series, D945, D925, D915
etc.(Use ARC2-797-C5).
ARC1-PELX16-CX (15625)

1-slot PCI-Express x16 Riser Card w/custom
length ribbon EMI shielding cable.
Goldfingers can be configured to either x1,
x4, x8 as an flexible adapter for various
motherboard PCIE slot.

For PCI-E expansion on any motherboard
PCI-E slot position. Re-direct the connector
to face toward the motherboard and act as a
reversed riser card.

1) ARC1-PELX16-C7 (PCIE x16 w/7cm cable)
2) ARC1-PELX16-C11 (PCIE x16 w/11cm
cable)
3) ARC1-PELX16-C7X1 (PCIE x16 connector,
x1 goldfingers w/7cm cable)
ARC1-PESX4-CX (15626)

PCI Express X4 flexible riser card with
various lengths of ribbon cable for 1U, 2U
IPC chassis, Mini-ITX, CarPC and other
applications that require mounting PCI
Express add-on card at different
locations.Goldfinger can be configured to
x1,x4. Riser slot can be re-directed to act as
reversed riser card.

Specifications:
One PCI Express X4 slot
Flexible cable length: from 5cm to 20cm.
Left-side insertion
ARC1-PESX8-CX (15627)

PCI Express X8 flexible riser card with
various lengths of ribbon cable for 1U, 2U
IPC chassis, Mini-ITX, CarPC and other
applications that require mounting PCI
Express add-on card at different
locations.Goldfinger can be configured to
x1,x4. Riser slot can be re-directed to act as
reversed riser card.

Specifications:
One PCI Express X8 slot
Flexible cable length: 5cm, 7cm, 11cm etc.
Left-side insertion
No Picture


ARK-100502 (15640)

2U cantilevel fixed shelf
No Picture


ARK-100
702 (15641)

1U sliding shelf
No Picture


ARK-100802TB (1564
2)

1U sliding keyboard drawer w/track ball
No Picture


ARK-101406-01 (15643)

1U 4-posts fixed shelf 29 1/2"
No Picture


ARK-101406-02
(15644)

1U 4-posts fixed shelf 27 1/2"
ASL-2001 (15745)

2U to 5U height 20" 3-sections Ball-Bearing
Slide Rail, 20"(L) x 1.79"(H) x 0.5"(Thickness)

More features:

Full travel 3-members Heavy-Duty 15 gauge
cold-rolled steel inner, intermediate and
outer member, compare to third-party's 10-12
gauge steel. Load Rating is up to 145 lbs.
Ball-bearings intermediate member provides
precise linear motion with smooth, silent
travel.
Lock-open and close to secure the chassis
in position for easy access, more tapped
screw
holes for easy mounting the L-brackets
directly onto the outer member without the
time consuming task of tightening the nuts
and screws.
W/additional 4.4mm x 45mm slotted holes
(2x), mountable to
most chassis (chassis width< =430mm).
Standard screws #10-32 & Metric screws
M4x6, M5x12 included.
Extendable to 32" depth.

For all 2U-up short chassis (chassis width
<430mm)with threaded mounting holes on
chassis side wall.
ASL-2601 (15746)

2U to 5U height, 26" 3-sections Ball Bearing
Slide Rail, 26"(L) x 1.79"(H) x 0.5"(Thickness)

More features:

Full travel 3-members Heavy-Duty 15 gauge
cold-rolled steel inner, intermediate and
outer member, compare to third-party's 10-12
gauge steel. Load Rating is up to 130 lbs.
Ball-bearings intermediate member provides
precise linear motion with smooth, silent
travel.
Lock-open and close to secure the chassis
in position for easy access, more tapped
screw
holes for easy mounting the L-brackets
directly onto the outer member without the
time consuming task of tightening the nuts
and screws.
long slotted holes( 4.4mm x 35mm, 5x)
mountable to most chassis (chassis width<
=430mm).
Standard screws #10-32 & Metric screws
M4x6, M5x12 included.
Extendable to 38" depth.
For most of AIC's 2U-up chassis, and all
Chenbro's, Akiwa, CI Design, Compucase,
I-Star's 2U to 5U chassis with threaded
mounting holes on chassis side wall.
For other chassis please match mounting
hole pattern.
ASL-1U2003 (15747)

1U height 3-sections Solid-Bearing Slide Rail, 20"(L)x
1.06"(27mmH) x 0.281"(7.16mm Thickness). Lock open and
quick release latch for easy chassis removal.

More features:

1. Ultra-thin 7.16mm(0.281") slide thickness.
2. W/easy-mount extender brackets 4x, maximal 27" extension.
3. For max 435mm width of package (opening of cabinet 451mm)
4. Load Rating 55 lbs. Cycle Test: 2500 times. Static Test; 3 Hrs.
24 hrs deflection: within 10mm. RoHS compliant finish(Chrome
Trio Zinc plating)

For all AIC, Quangshing, CI Design 1U short chassis and third
party 1U chassis with
threaded screw mounting holes on chassis side wall.
ASL-1U2603 (15748)

1U height 3-sections Solid-Bearing Slide Rail, 26"(L) x
1.06"(27mmH) x 0.295"(7.16mm Thickness). Lock open and
quick release latch for easy chassis removal.

More features:

1. Ultra-thin 7.16mm (0.295") slide thickness.
2. W/easy-mount extender brackets 4x, maximal 33" extension.
3. For max 435mm width of package (opening of cabinet 451mm)
4. Load Rating 55 lbs. Cycle Test: 2500 times. Static Test; 3 Hrs.
24 hrs deflection: within 10mm. RoHS compliant finish(Chrome
Trio Zinc plating)

For all AIC, Quangshing, CI Design and the third party 1U
extended chassis with
threaded mounting holes on chassis side wall.

ARC1-PELX16A1-C7V2X8 (15628)

PCIe x8 flexible extender/adapter. PCIe x16 right-angled female to x8 male connector with 5cm(2") or 7cm(2.75") flexible ribbon. PCIe 2.0 Gen2 compatible,RoHS compliant.

Specifications: One PCI Express X16 female slot to X8 male gold finger. Flexible cable length: 5cm,7cm or custom lengths, EMI shielded Left-side insertion (to face away the board). PCIe 2.0 Gen2, RoHS compliant.

Ordering information: 1) ARC1-PELX16A1-C5V2X8 (x16 female to x8 male, 5cm ribbon) 2) ARC1-PELX16A1-C7V2X8 (x16 female to x8 male, 7cm ribbon)