Copyright 2012, Rexus Corp. All Rights Reserved.

To contact, please call (909) 598-5551
To e-mail, please write to sales@rexususa.com
ARC1-003CH (15605)

1U 1*PCI 32bit/5V/3.3V 33MHz Left Angle
direct-plug riser card for motherboard w/ PCI
32bit on slot-6, with custom mounting holes
for Chenbro 1U chassis. Connector center
height=0.802"
ARC1-003R (15606)

1U 1*PCI 32bit/5V/33MHz reversed riser card.
ARC1-183R (15608)

1U 1*PCI-X 64bit/3.3V/ 66/100/133MHz
reversed riser card, direct plug to the
motherboard PCIX-64 slot-1 or butterfly slot
of Supermicro H8DAR-T.

A low-profile riser connector (0.2" lower than
the standard 64bit connector) enable you to
package the tight space in the chassis.
ARC1-020-CX (16509)

1-slot PCIX-64bit/3.3V flexible riser card
w/various lengths ribbon cable and
direct-soldered connector to support higher
PCI bus speed.

Ordering info:
1) ARC1-020-C5 (w/5cm cable for
motherboard PCI-X slot-5 away from the
board)
2) ARC1-020-C7 (w/7cm cable for
motherboard PCI-X slot-3 away from the
board)
3) ARC1-020-C9 (w/9cm cable for
motherboard PCI-X slot-2 away from the
board)
4) ARC1-020-C11(w/11cm cable for
motherboard PCI-X slot-1 away from the
board)
ARC1-152-CX (15610)

1-slot PCI-32bit/5V/3.3V 33MHz riser card
w/custom length flexible cable (from 2.5cm to
20cm). The PCI-32 connector face away the
motherboard but can be redirected to the
reversed side.

For PCI-32 extension on any motherboard
slot with universal goldfingers either for
PCI-32/5V or PCI-64/3.3V slot .

Also come with vertical connector to avoid
conflicts of components on motherboard.
Extended cable can be offset and redirected
to be used in any 1U/2U or mini-ATX chassis.
ARC1-152R-Cx (15611)

1-slot PCI-32bit/33MHz 5V/3.3V reversed
(face over the motherboard) riser card
w/custom length flex cable from 3cm to
20cm, with universal goldfingers of 5V and
3.3 V, either for connection to PCI-32 or
PCI-64 motherboard slot. The cable can be
folded to provide offset and the riser
connector can be re-directed to any position.
ARC-009E (15612)

1-slot PCI 32bit/5V/33MHz riser card with
custom length flexible cable from 2.5cm(1")
to 20cm(7.125"), for extension of PCI-32 in
any motherboard slot. RoHS compliant.
ARC1-009E (w/7cm)

Flex cable can be offset and with entended
cable this card can be used in any U height
chassis.
ARC-009x
15612 -9cm
15613-11cm
15614-13cm
15615-15cm
15616-20cm

1-slot PCI 32bit/5V/33MHz riser card with
custom length flexible cable from
2.5cm(1") to 20cm(7.125"), for extension
of PCI-32 in any motherboard slot. RoHS
compliant.
ARC1-009-Cx(w/custom length)

Flex cable can be offset and with
entended cable this card can be used in
any U height chassis.
ARC1-PEX16 (15617)

1U PCIe x16 Riser Card for PCIe x16 on motherboard
slot-6, slot height=14.7mm,for Tyan S2891, Supermicro
X6 Series etc.
ARC1-PEX8 (15618)

1U one-slot PCIe x8 Riser Card for PCIe x8
expansion on motherboard PCIE x8 slot-6,
connector center height=1.06"
ARC1-PEX1 (15619)

PCI Express X1 riser card for 1U IPC chassis.
Connector center height=1.06"

Specifications:
One PCI Express X1 slot.
connector center height: 1.06"
Left-side insertion.
ARC1-PEX16EXT (15620)

1U PCIe x16 riser card w/Extender for PCI-E on
motherboard slot-7, such as Intel D915/D925/D945
Series,Tyan S5120/S5130 etc.)
ARC2-PEX16
15705-(W/extender for use on MB slot-7)
15706-(PCIE x16 connector, x16 goldfingers)

2U height 1-slot PCI-Express x16 riser card
with extended PCB and enhanced circuitry,
RoHS compliant. Goldfingers can be
configured to either x16, x8, x4 or x1 to fit the
various PCIE motherboard slots. Connector
center height=2.61".

The top PCIe slot linked directly to the
goldfingers, direct plug to the motherboard
slot-6 for PCIe expansion on any 2U height
chassis.

Add extender (ARC1-08X16) for PCIe expansion
on motherboard slot-7.
ARC1-08
15621-x16 slot,x16 goldfingers
15622-x16 slot,x1 goldfingers
15623-x16 slot,x3 goldfingers
15624-x16 slot,x8 goldfingers

PCIe x16, x8, x4, x1 adapter and extender with
x16 slot and x16, x8, x4 or x1 goldfingers for
various PCIe slots.

Used to increase the height or extension (0.8")
of your PCI-E or, acting as a wearout protector
or an adapter to enable your add-in card
w/PCIE x16 interface to plug to the motherboard
PCIE x1, x4 or x8 slots.
ARC2-007JML (15707)

2U 3*PCI-32bit/5V 33MHz single bus riser card.

ARC2-007JML (Mfr# JM112) w/58mm height for
Chenbro's 2U chassis.

Use a 2-channel riser card (# ARC2-650-Cx) to
support 2 independent buses of up to 3 slots
PCI-32 expansion.
ARC2-007 (15708)

2U 3*PCI-32bit/5V/33MHz single bus riser card.
for AIC and Compucase 2U chassis.

Use a 2-channel riser (#ARC2-650-Cx) to
support 2 independent buses of up to 3 slots
PCI-32 expansion.
ARC2-011
15709-2.5cm cable
15710-7cm cable

2U 3-slots PCI-32bit/5V/33MHz riser card
w/custom lengths of ribbon cable.

ARC2-011 (w/2.5cm cable)
ARC2-011E (w/7cm cable)

Middle riser slot linked to the connector with
wide ribbon cable. Top and botton riser slots
linked with 8-wires paddle link from behind or
in front of PCB to connect to the other two
PCI-32 motherboard slots.

Up to 3-slots expansion for PCI-32 slots away
from the motherboard.
ARC2-012JM
15711-JML
15712-JM

2U 3*PCI-64 bit/3.3V 66MHz/100MHz single bus
Riser Card,

ARC2-012JML(mfr# JM112) w/H=58mm for
Chenbro's 2U).
ARC2-012JM (Mfr# JM106) w/62mm height for
AIC and Compucase 2U.

Doesn't support two independent PCIX-64
buses. Instead please use a 2-channel PCI-X
riser card(ARC2-656 or ARC2-656-Cx).
CLICK HERE FOR PAGE 2...
ARC2-012 (15713)

2U 2-slots 64bit/3.3V 66/100MHz single bus
riser card (H=62mm for AIC's 2U)

For motherboard with the same bus of
PCIX-64 on slot-5 and slot-6. Doesn't support
2 indepedent PCIX-64 buses. Instead please
use 2- channels riser card ARC2-656 or
ARC2-656-Cx.
ARC2-65A1-CX (15714)

2U 1*PCIX-64bit/3.3V + 2*PCI-32bit/5V w/various
lengths of flex cable. PCI-64 bus linked to the riser
middle slot.

For up to 3-slots(1*PCIX-64 and 2*PCI-32 )
expansion of 2 independent PCI buses.such as
Supermicro P8SC8/P8SCi etc.
ARC2-65A1 (15715)

2U 1*PCIX-64bit/3.3V + 2*PCI-32bit/5V Riser
Card. Use ARC2-65A1 for PCIX-64 in the
riser middle slot.

For 1 slot PCIX-64/133MHz and 2-slots
PCI-32/33MHz expansions such as
Supermicro P8SCT,PDSMA,PDSMA+,
H8SSL-i, H8SSL-R10 etc.

ARC2-65A1 (2-slots PCI-32 and 1-slot
PCIX-64 in the middle riser slot)
Riser Cards and Slide Rails